U.S. Memorial Wereth

Just how do I link a dryer with a four prong connect to a three prong socket?

Just how do I link a dryer with a four prong connect to a three prong socket?

I have simply relocated household and my personal garments dryer enjoys a four prong connect but in the wall there’s a three prong outlet. Carry out adapters occur for this? Or do i must see a new cord for my personal dryer? Or perhaps is around another remedy?

6 Answers 6

You might ilove username replace the cable throughout the dryer, you’d must bond the body in the dryer which will make that acceptable to current NEC codes (post 250.140). This might be a safety danger if accomplished wrongly, and it also may invalidate the warranty throughout the dryer.

As your dryer is initiated to use a 4 prong receptacle, the perfect solution should be to modify the receptacle to a 4 prong (NEMA 14-30R if I bear in mind precisely). However, this will require that you run latest cable with the receptacle, because youwill need a cable with a ground. According to draw with the dryer and the duration of the operate, you will either must draw new 10-3 /w crushed or 8-3 /w floor cable tv.

As @TheEvilGreebo described, you are capable just change out the cord in the dryer for a 3 prong variation. Check out the companies documentation to confirm the process, and to make fully sure your design supports this.

This schematic for an electric dryer might help you comprehend the way the dryer maybe wired (dependent on make/model/manufacture date).

easy and simple thing to do is to replace the retailer, line a outlet in, presuming both of them make use of the same kind of wire (typically 10-3). your flip the circuit off before you do it, obviously. easier than shopping for an adapter (and most likely safer)

Dryer wires are created to feel replaced. Its evidently even common for them to deliver without a cord in order to install the appropriate wire to suit your outlet. Houses built before 1996 typically require a 3-wire cable with a NEMA 10-30 connector. Homes constructed following 1996 (in US) routinely have a NEMA 14-30 outlet, and will require a 4-wire cord. (FWIW, a unique cord appears to run-around $11-$25 (by 2015), based just how long you need it and for which you buy it.)

Whirlpool features detail by detail wiring guidelines to make sure you are wiring it properly. Various other producers will probably posses similar guidelines.

Residence Depot has many common wiring instructions. Unlike people here, they recommend not upgrading the socket to NEMA 14 your self, but having a licensed electrician exercise in the event that’s how you wanna get.

Having an independent ground feels like advisable initially, but if your dryer is similar to mine, it will not making most improvement. Mine came with a 4-wire wire, but crushed and basic are wired into the exact same terminal internally. We initially thought that had been insane, however it is consistent with the installations training (though it is achievable to make sure they’re different). So, depending on the dryer, you might not see a separate surface even with a 14-30 connector.

For individuals who say this can not be completed you are able that sooner or later the wires are set up for a 220v thirty amp system, right after which down graded to a 120v 20 amp routine. See what wires can be found in the package after assuring there’s no power. If you have the thicker wire into the right collection, your lucked completely.

There are two solutions.

1) either you need to upgrade the retailer regarding wall structure to a 4-prong while the wiring that operates to it from the breaker panel. 4-prong channels has two hot cable, a neutral, and surface.


2) You download a 3-prong connect on your dryer.

The most affordable choice should be to change the connect on the dryer. 4-prong connect is the current standard, so if you manage improve the socket, you’re going to be ready for future.

EDITED for explanation:

The three prong plug keeps two hot thighs for the two bus voltages to provide around 220 volts, plus a simple wire. Ahead of 1998 the natural has also been grounded for the dryer instance. A four prong plug provides the two bus relationships, a ground, and a neutral return. Typically these are generally made use of if the dryer circuit need 120 volts at some point, the existing would stream from bus and return through the neutral. If you decided to vary from a four prong to a three prong plus dryer is designed to incorporate 120 volts at some point, subsequently that present will need to be came back on the ground lower body. This is simply not appropriate by NEC code, nor is it safe. In the event the 120 Volt routine are to short, the total 120 volt potential might be present from the dryer instance! Think about pressing the dryer in those days, and maybe on a wet flooring!

If you can decide that dryer doesn’t need 120 volts, which no present is actually came back on a basic leg, then I read no reason at all not to use the three prong (although why does it need a natural leg whatsoever?). I would personally ONLY perform some transformation if it’s recomended by the make. With todays economic climate I really don’t genuinely believe that a manufacture would visit the expenditure of a four prong connect whether or not it was not expected.

The conversion process kits pointed out by other individuals may be to transform from a three prong dryer to a four prong receptacle. Definitely okay, being your simple cable isn’t put.